ALI: Aluminium
Available for Dado, Skirting and Flush Floor Trunking
Please add /ALI to your part number
BR: Brass
To standard ASTM B121 / B121M-16
Recommended for internal decorative light duty floor solutions
Available for Cavity & Screed Floor Boxes
Please add /BR to your part number
BZP: Bright Zinc Plate
To standard ASTM A123/A123M – 15
Standard finish available for Cable Basket
Please add /BZP to your part number
CH: Chrome
Recommended for a slick clean finish
Available for Grommets
Please add /CH to your part number
PC: Powder Coated
To standard BS EN 13438: 2013
Recommended for interior use although the extra coating in conjunction with the galvanising process does make it non corrosive to a higher standard than the basic PG. You can select your finish in a BS or RAL colour number. Great solution when you have aesthetic considerations. Standard white RAL colour is 9003 unless otherwise stated
Available for Cable Basket, Tray, Trunking, Lighting Trunking, Floor boxes, Dado and Skirting
Please add /PC to your part number
HDG: Hot Dipped Galvanised
To standard ISO 1461
Recommended for both indoor and outdoor installation and especially more aggressive and corrosive conditions
Available for Cable Basket, Tray and Trunking. All HDG trunking is only available in 2m lengths
Please add /HDG to your part number
MG: Magnelis
An innovative metallic coating that offers protection in the harshest environments.
Available for Cable Trunking and Tray
Please add /MG to your part number
PG: Pre-Galvanised
To standard BS EN 10346: 2015
Recommended for non corrosive interior installation i.e datacentres
Available for all Cable Trunking, Tray and Basket
Please add /PG to your part number
SS: Stainless Steel
Grade to standard BS EN 10088-1: 2014
Recommended for external use, food or chemical areas. 304 or 316 available (except floor boxes – only 304). You will be supplied 304 unless otherwise stated
Available for Cable Basket, Tray, Trunking, Conduit and Floor Boxes
Please add /SS to your part number
WP: WeatherProof
Recommended for external installations, especially where a non-corrosive and ingress resistant finish is required
Available for Single and Multi Compartment Cable Trunking
Please add /WP to your part number
CPC: Clear Polyester
Meets the full requirements of BS6496/7
Clear Polyester Coating is recommended for use in both interior and exterior applications. It is established as an alternative to the traditional post-galvanising process
Uses of CPC finish include installation in corrosive atmospheres such as chemical plants, battery rooms, marine environments or general outside use where post galvanised or stainless steel systems have been commonly specified in the past. In such installations, CPC offers a more cost effective solution when combining the factors of mechanical performance, ease of installation and endurance
Please add /CPC to your part number